An Expert interview about 300 115 vce

Free Instant Download NEW 70-490 Exam Dumps (PDF & VCE):
Available on: https://www.certifytools.com/300-115-exam.html

Proper study guides for Most recent Cisco SWITCH Implementing Cisco IP Switched Networks certified begins with Cisco ccnp switch 300 115 pdf preparation products which designed to deliver the Certified ccnp switch 300 115 pdf questions by making you pass the ccnp 300 115 dumps test at your first time. Try the free ccnp routing and switching switch 300 115 official cert guide demo right now.

P.S. Certified 300-115 Q&A are available on Google Drive, GET MORE: https://drive.google.com/open?id=1VHsb6dx9nuEZoveat99_kZpaJRSN1wlZ


New Cisco 300-115 Exam Dumps Collection (Question 11 - Question 20)

Question No: 11

Which command sequence do you enter to configure an rspan vlan ?

A. Vlan 4097 remote-span

B. Vlan 4097 name RSPAN

C. Vlan 51

D. Remote-span

E. Vlan 51

F. Name rspan

Answer: C,D


Question No: 12

Refer to the exhibit. Switch 15 is configured as the root switch for VLAN 10 but not for VLAN 20. If the STP configuration is correct, what will be true about Switch 15?

A. All ports will be in forwarding mode.

B. All ports in VLAN 10 will be in forwarding mode.

C. All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in blocking mode.

D. All ports in VLAN 10 will be in forwarding mode and all ports in VLAN 20 will be in standby mode.

Answer: B


Question No: 13

CORRECT TEXT

VTP Domain name : cisco VLAN Ids 20 31

IP Addresses 172.16.71.1/24 172.16.132.1/24

These are your specific tasks:

1. Configure the VTP information with the distribution layer switch as the VTP server

2. Configure the VTP information with the access layer switch as a VTP client

3. Configure VLANs on the distribution layer switch

4. Configure inter-VLAN routing on the distribution layer switch

5. Specific VLAN port assignments will be made as users are added to the access layer switches in the future.

6. All VLANs and VTP configurations are to completed in the global configuration To configure the switch click on the host icon that is connected to the switch be way of a serial console cable.

Answer:

Please refer to explanation below:

Explanation:

vtp server configuration:

switch#conf t

switch(config)#vtp mode server

switch(config)#vtp domain CISCO

switch(config)#vlan 20

switch(config)#vlan 31

switch(config)#int vlan 20

switch(if-config)#ip add 172.64.20.1 255.255.255.0

switch(if-config)#no shut

switch(if-config)#int vlan 31

switch(if-config)#ip add 192.162.31.1 255.255.255.0

switch(if-config)#no shut

switch(if-config)#exit switch#ip routing

switch#copy run start

vtp client configuration:

switch#conf t

switch(config)#vtp mode client

switch(config)#vtp domain CISCO

switch#copy run start

Alternative #1

VTP DomainDistribution VLAN Ids2031

IP Addresses172.16.16.1/24172.16.193.1/24

Alternative #12

VTP DomainDistribution

VLAN Ids3021

IP Addresses172.16.203.1/24172.16.93.1/24


Question No: 14

When port security is configured on a switch, which violation mode is the default?

A. shutdown

B. logging

C. no change

D. error disable

Answer: A


Question No: 15

Which command is required for root guard for Cisco device to place ID:2071948x? (Where x is the last digit ID)

A. (config if)# spanning-tree guard root

B. (config)# spanning-tree guard root

C. (config-if)# spanning-tree root guard

D. (config)# spanning-tree root guard

Answer: A


Question No: 16

Which three design types of capable Ethernet LANs does HSRP support? (Choose three.)

A. Multicaccess

B. Multicast

C. Broadcast

D. Unicast

E. Token Ring

F. FDDI

Answer: A,B,C


Question No: 17

What is the effect of configuring the following command on a switch?

Switch(config) # spanning-tree portfast bpdufilter default

A. If BPDUs are received by a port configured for PortFast, then PortFast is disabled and the BPDUs are processed normally.

B. If BPDUs are received by a port configured for PortFast, they are ignored and none are sent.

C. If BPDUs are received by a port configured for PortFast, the port transitions to the forwarding state.

D. The command enables BPDU filtering on all ports regardless of whether they are configured for BPDU filtering at the interface level.

Answer: A


Question No: 18

Which command configures VLAN 99 as an untagged VLAN on a trunk?

A. switchport access vlan 99

B. switchport trunk pruning vlan except 99

C. switchport trunk allowed vlan 99

D. switchport trunk native vlan 99

Answer: D


Question No: 19

Which technique allows specific VLANs to be strictly permitted by the administrator?

A. VTP pruning

B. transparent bridging

C. trunk allowed VLANs

D. VLAN access-list

E. L2P tunneling

Answer: C


Question No: 20

Which three statements are correct with regard to the IEEE 802.1Q standard? (Choose three)

A. The IEEE 802.1Q frame format adds a 4 byte field to a Ethernet frame

B. The packet is encapsulated with a 26 byte header and a 4 byte FCS

C. The protocol uses point-to-multipoint connectivity

D. The protocol uses point-to-point connectivity

E. The IEEE 802.1Q frame uses multicast destination of 0x01-00-0c-00-00

F. The IEEE 802.1Q frame retains the original MAC destination address

Answer: A,D,F


100% Most recent Cisco 300-115 Questions & Answers shared by 2passeasy, Get HERE: https://www.2passeasy.com/dumps/300-115/ (New 416 Q&As)


Get More Information : Get 300-115 now

Money Back Guarantee

Guarantee

CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.

Who Chooses CertifyForAll

CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.

EXE exam format