How Does Testking Cisco 200-125 exam question Work?

Free Instant Download NEW 70-490 Exam Dumps (PDF & VCE):
Available on: https://www.certifytools.com/200-125-exam.html

We develop the analyze engine to assist you inside passing the Cisco Cisco exam. Every one of the Cisco exam answers can make anyone reply the questions using full confidence. Many of us promise for you to offer anyone passing guarantee using the detailed answers in the Cisco 200-125 actual analyze. Exambible?¡¥s Cisco 200-125 exam questions and answers remain inside vogue in that we keep each of the studying materials up-to-date, correct and trustworthy in daily use.

2016 Oct 200-125 free practice exam

Q71. - (Topic 4) 

Refer to the exhibit. 


The speed of all serial links is E1 and the speed of all Ethernet links is 100 Mb/s. A static route will be established on the Manchester router to direct traffic toward the Internet over the most direct path available. What configuration on the Manchester router will establish a route toward the Internet for traffic that originates from workstations on the Manchester LAN? 

A. ip route 0.0.0.0 255.255.255.0 172.16.100.2 

B. ip route 0.0.0.0 0.0.0.0 128.107.1.1 

C. ip route 0.0.0.0 255.255.255.252 128.107.1.1 

D. ip route 0.0.0.0 0.0.0.0 172.16.100.1 

E. ip route 0.0.0.0 0.0.0.0 172.16.100.2 

F. ip route 0.0.0.0 255.255.255.255 172.16.100.2 

Answer: E 


Q72. - (Topic 4) 

Refer to the exhibit. 


The technician wants to upload a new IOS in the router while keeping the existing IOS. What is the maximum size of an IOS file that could be loaded if the original IOS is also kept in flash? 

A. 3 MB 

B. 4 MB 

C. 5 MB 

D. 7 MB 

E. 8 MB 

Answer: B 


Q73. - (Topic 4) 

A Cisco router is booting and has just completed the POST process. It is now ready to find and load an IOS image. What function does the router perform next? 

A. It checks the configuration register. 

B. It attempts to boot from a TFTP server. 

C. It loads the first image file in flash memory. 

D. It inspects the configuration file in NVRAM for boot instructions. 

Answer: A 


Q74. DRAG DROP - (Topic 8) 


Answer: 



Q75. - (Topic 3) 

Which IPv6 address is the all-router multicast group? 

A. FF02::1 

B. FF02::2 

C. FF02::3 

D. FF02::4 

Answer: B 


200-125 exam guide

Renovate 200-125 vce:

Q76. - (Topic 2) 

Refer to the exhibit. 


Which two statements are true about interVLAN routing in the topology that is shown in the exhibit? (Choose two.) 

A. Host E and host F use the same IP gateway address. 

B. Router1 and Switch2 should be connected via a crossover cable. 

C. Router1 will not play a role in communications between host A and host D. 

D. The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces. 

E. Router1 needs more LAN interfaces to accommodate the VLANs that are shown in the exhibit. 

F. The FastEthernet 0/0 interface on Router1 and the FastEthernet 0/1 interface on Switch2 trunk ports must be configured using the same encapsulation type. 

Answer: D,F 


Q77. - (Topic 2) 

Refer to the exhibit. 


Which two statements are true of the interfaces on Switch1? (Choose two.) 

A. Multiple devices are connected directly to FastEthernet0/1. 

B. A hub is connected directly to FastEthernet0/5. 

C. FastEthernet0/1 is connected to a host with multiple network interface cards. 

D. FastEthernet0/5 has statically assigned MAC addresses. 

E. FastEthernet0/1 is configured as a trunk link. 

F. Interface FastEthernet0/2 has been disabled. 

Answer: B,E 


Q78. - (Topic 5) 

Refer to the exhibit. 


Which rule does the DHCP server use when there is an IP address conflict? 

A. The address is removed from the pool until the conflict is resolved. 

B. The address remains in the pool until the conflict is resolved. 

C. Only the IP detected by Gratuitous ARP is removed from the pool. 

D. Only the IP detected by Ping is removed from the pool. 

E. The IP will be shown, even after the conflict is resolved. 

Answer: A 


Q79. - (Topic 2) 

Refer to the exhibit. 


A network technician is asked to design a small network with redundancy. The exhibit represents this design, with all hosts configured in the same VLAN. What conclusions can be made about this design? 

A. This design will function as intended. 

B. Spanning-tree will need to be used. 

C. The router will not accept the addressing scheme. 

D. The connection between switches should be a trunk. 

E. The router interfaces must be encapsulated with the 802.1Q protocol. 

Answer: C 


Q80. - (Topic 6) 

Which set of commands is recommended to prevent the use of a hub in the access layer? 

A. switch(config-if)#switchport mode trunk 

switch(config-if)#switchport port-security maximum 1 

B. switch(config-if)#switchport mode trunk 

switch(config-if)#switchport port-security mac-address 1 

C. switch(config-if)#switchport mode access 

switch(config-if)#switchport port-security maximum 1 

D. switch(config-if)#switchport mode access 

switch(config-if)#switchport port-security mac-address 1 

Answer: C 


Get More Information : Get 200-125 now

Money Back Guarantee

Guarantee

CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.

Who Chooses CertifyForAll

CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.

EXE exam format