The Secret of 200-125 exam answers

Free Instant Download NEW 70-490 Exam Dumps (PDF & VCE):
Available on: https://www.certifytools.com/200-125-exam.html

We offer 100% money back again guarantee. In the event you don?¡¥t get certified within the first attempt, email us your own score transcript and we can return your own money. As simple because that. It is time to look at actions proper now. Commence earlier and get certified earlier. Exambible.org provide 7/24 on-line customer assistance. Our workers are usually knowledgeable along with dedicated which promise you satisfactory answers to virtually any questions.

2016 Oct 200-125 real exam

Q11. - (Topic 6) 

When you are troubleshooting an ACL issue on a router, which command would you use to verify which interfaces are affected by the ACL? 

A. show ip access-lists 

B. show access-lists 

C. show interface 

D. show ip interface 

E. list ip interface 

Answer: D 


Q12. - (Topic 4) 

Why do large OSPF networks use a hierarchical design? (Choose three.) 

A. to decrease latency by increasing bandwidth 

B. to reduce routing overhead 

C. to speed up convergence 

D. to confine network instability to single areas of the network 

E. to reduce the complexity of router configuration 

F. to lower costs by replacing routers with distribution layer switches 

Answer: B,C,D 


Q13. - (Topic 1) 

Refer to the exhibit. 


Which three statements correctly describe Network Device A? (Choose three.) 

A. With a network wide mask of 255.255.255.128, each interface does not require an IP address. 

B. With a network wide mask of 255.255.255.128, each interface does require an IP address on a unique IP subnet. 

C. With a network wide mask of 255.255.255.0, must be a Layer 2 device for the PCs to communicate with each other. 

D. With a network wide mask of 255.255.255.0, must be a Layer 3 device for the PCs to communicate with each other. 

E. With a network wide mask of 255.255.254.0, each interface does not require an IP address. 

Answer: B,D,E 


Q14. - (Topic 6) 

Refer to the exhibit. 


Statements A, B, C, and D of ACL 10 have been entered in the shown order and applied to interface E0 inbound, to prevent all hosts (except those whose addresses are the first and last IP of subnet 172.21.1.128/28) from accessing the network. But as is, the ACL does not restrict anyone from the network. How can the ACL statements be re-arranged so that the system works as intended? 

A. ACDB 

B. BADC 

C. DBAC 

D. CDBA 

Answer: D 


Q15. - (Topic 6) 

A network administrator is configuring ACLs on a Cisco router, to allow traffic from hosts on networks 192.168.146.0, 192.168.147.0, 192.168.148.0, and 192.168.149.0 only. Which two ACL statements, when combined, would you use to accomplish this task? (Choose two.) 

A. access-list 10 permit ip 192.168.146.0 0.0.1.255 

B. access-list 10 permit ip 192.168.147.0 0.0.255.255 

C. access-list 10 permit ip 192.168.148.0 0.0.1.255 

D. access-list 10 permit ip 192.168.149.0 0.0.255.255 

E. access-list 10 permit ip 192.168.146.0 0.0.0.255 

F. access-list 10 permit ip 192.168.146.0 255.255.255.0 

Answer: A,C 


200-125 download

Update 200-125 download:

Q16. - (Topic 3) 

Which of these represents an IPv6 link-local address? 

A. FE80::380e:611a:e14f:3d69 

B. FE81::280f:512b:e14f:3d69 

C. FEFE:0345:5f1b::e14d:3d69 

D. FE08::280e:611:a:f14f:3d69 

Answer: A 


Q17. - (Topic 4) 

What is the effect of using the service password-encryption command? 

A. Only the enable password will be encrypted. 

B. Only the enable secret password will be encrypted. 

C. Only passwords configured after the command has been entered will be encrypted. 

D. It will encrypt the secret password and remove the enable secret password from the configuration. 

E. It will encrypt all current and future passwords. 

Answer: E 


Q18. - (Topic 7) 

Refer to the exhibit. 


If the devices produced the given output, what is the cause of the EtherChannel problem? 

A. SW1's Fa0/1 interface is administratively shut down. 

B. There is an encapsulation mismatch between SW1's Fa0/1 and SW2's Fa0/1 interfaces. 

C. There is an MTU mismatch between SW1's Fa0/1 and SW2's Fa0/1 interfaces. 

D. There is a speed mismatch between SW1's Fa0/1 and SW2's Fa0/1 interfaces. 

Answer: D 


Q19. CORRECT TEXT - (Topic 9) 

A corporation wants to add security to its network. The requirements are: 

. Host C should be able to use a web browser (HTTP) to access the Finance Web Server. 

. Other types of access from host C to the Finance Web Server should be blocked. 

. All access from hosts in the Core or local LAN to the Finance Web Server should be blocked. 

. All hosts in the Core and on local LAN should be able to access the Public Web Server. 

You have been tasked to create and apply a numbered access list to a single outbound interface. This access list can contain no more than three statements that meet these requirements. 

Access to the router CLI can be gained by clicking on the appropriate host. 

All passwords have been temporarily set to “cisco”. 

The Core connection uses an IP address of 198.18.209.65. 

The computers in the Hosts LAN have been assigned addresses of 192.168.78.1 – 192.168.78.254. 

host A 192.168.78.1 

host B 192.168.78.2 

host C 192.168.78.3 

host D 192.168.78.4 

The Finance Web Server has been assigned an address of 172.22.146.17. 

The Public Web Server in the Server LAN has been assigned an address of 172.22.146.18.








 

Answer: MISSING 


Q20. - (Topic 8) 

Which command is used to enable CHAP authentication, with PAP as the fallback method, on a serial interface? 

A. Router(config-if)# ppp authentication chap fallback ppp 

B. Router(config-if)# ppp authentication chap pap 

C. Router(config-if)# authentication ppp chap fallback ppp 

D. Router(config-if)# authentication ppp chap pap 

Answer: B 


Get More Information : Get 200-125 now

Money Back Guarantee

Guarantee

CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.

Who Chooses CertifyForAll

CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.

EXE exam format