Get Smart with ccna 200 125 dumps

Free Instant Download NEW 70-490 Exam Dumps (PDF & VCE):
Available on: https://www.certifytools.com/200-125-exam.html

Pass4sure 200 125 ccna v3 0 Questions are updated and all 200 125 cisco answers are verified by experts. Once you have completely prepared with our ccna 200 125 torrent exam prep kits you will be ready for the real cisco ccna 200 125 exam without a problem. We have Up to date Cisco ccna 200 125 study guide dumps study guide. PASSED ccna 200 120 vs 200 125 First attempt! Here What I Did.

P.S. Virtual 200-125 software are available on Google Drive, GET MORE: https://drive.google.com/open?id=1TVPbOp7ab9OckkT77rZa87L3hf9XaR7B


New Cisco 200-125 Exam Dumps Collection (Question 16 - Question 24)

New Questions 16

Refer to the exhibit.

What is the effect of the given configuration?

A. It configures an inactive switch virtual interface.

B. It configures an active management interface.

C. It configures the native VLAN.

D. It configures the default VLAN.

Answer: A

Topic 2, Exam Set 2

74.Which function does the IP SLAs ICMP Echo operation perform to assist with troubleshooting?

A. hop-by-hop response time

B. packet-loss detection

C. congestion detection

D. one way jitter measurements


New Questions 17

Which three options are types of Layer 2 network attack? (Choose three.)

A. ARP attacks

B. brute force attacks

C. spoofing attacks

D. DDOS attacks

E. VLAN hopping

F. botnet attacks

Answer: A,C,E


New Questions 18

Which statement about named ACLs is true?

A. They support standard and extended ACLs.

B. They are used to filter usernames and passwords for Telnet and SSH.

C. They are used to filter Layer 7 traffic.

D. They support standard ACLs only.

E. They are used to rate limit traffic destined to targeted networks.

Answer: A

Explanation:

Named Access Control Lists (ACLs) allows standard and extended ACLs to be given names instead of numbers. Unlike in numbered Access Control Lists (ACLs), we can edit Named Access Control Lists. Another benefit of using named access configuration mode is that you can add new statements to the access list, and insert them wherever you like. With the legacy syntax, you must delete the entire access list before reapplying it using the updated rules.


New Questions 19

Scenario:

You work for a company that provides managed network services, and of your real estate clients running a small office is experiencing network issues, Troubleshoot the network issues.

Router R1 connects the main office to internet, and routers R2 and R3 are internal routers NAT is enabled on Router R1.

The routing protocol that is enable between routers R1, R2, and R3 is RIPv2.

R1 sends default route into RIPv2 for internal routers to forward internet traffic to R1. Server1 and Server2 are placed in VLAN 100 and 200 respectively, and dare still running

router on stick configuration with router R2.

You have console access on R1, R2, R3, and L2SW1 devices. Use only show commands to troubleshoot the issues.

Users in the main office complain that they are unable to reach internet sites.

You observe that internet traffic that is destined towards ISP router is not forwarded correctly on Router R1. What could be an issue?

Ping to Internet server shows the following results from R1: R1#ping 209.165.200.225

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 209.165.200.225. timeout is 2 seconds:

.....

Success rate is 0 percent (0/5)

A. The next hop router address for the default route is incorrectly configured.

B. Default route pointing to ISP router is configured with AD of 255.

C. Default route pointing to ISP router is not configured on Router R1

D. Router R1 configured as DHCP client is not receiving default route via DHCP from ISP router.

Answer: C

Explanation:

(Default Static Route will fix the problem to connect to ISP router)


New Questions 20

Refer to the exhibit. Which two statements are true about the loopback address that is configured on RouterB? (Choose two.)

A. It ensures that data will be forwarded by RouterB.

B. It provides stability for the OSPF process on RouterB.

C. It specifies that the router ID for RouterB should be 10.0.0.1.

D. It decreases the metric for routes that are advertised from RouterB.

E. It indicates that RouterB should be elected the DR for the LAN.

Answer: B,C

Explanation:

A loopback interface never comes down even if the link is broken so it provides stability for the OSPF process (for example we use that loopback interface as the router-id) -

The router-ID is chosen in the order below:

+ The highest IP address assigned to a loopback (logical) interface.+ If a loopback interface is not defined, the highest IP address of all active routeru2019s physical interfaces will be chosen.

-> The loopback interface will be chosen as the router ID of RouterB u2013


New Questions 21

Which routing protocol has the smallest default administrative distance?

A. IBGP

B. OSPF

C. IS-IS

D. EIGRP

E. RIP

Answer: D

Explanation: http://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol- bgp/15986-admin-distance.html

Default Distance Value Table

This table lists the administrative distance default values of the protocols that Cisco supports:

Route Source

Default Distance Values

Connected interface 0

Static route 1

Enhanced Interior Gateway Routing Protocol (EIGRP) summary route 5

External Border Gateway Protocol (BGP) 20

Internal EIGRP 90

IGRP 100 OSPF

110

Intermediate System-to-Intermediate System (IS-IS) 115

Routing Information Protocol (RIP) 120

Exterior Gateway Protocol (EGP) 140

On Demand Routing (ODR) 160

External EIGRP 170

Internal BGP 200

Unknown* 255


New Questions 22

Which two pieces of information are provided by the show controllers serial 0 command? (Choose two.)

A. the type of cable that is connected to the interface.

B. The uptime of the interface

C. the status of the physical layer of the interface

D. the full configuration of the interface

E. the interface's duplex settings

Answer: A,C

Explanation:

Theshow controllercommand provides hardware-related information useful to troubleshoot and diagnose issues with Cisco router interfaces. The Cisco 12000 Series uses a distributed architecture with a central command-line interface (CLI) at the Gigabit Route Processor (GRP) and a local CLI at each line card.


New Questions 23

Which NAT function can map multiple inside addresses to a single outside address?

A. PAT

B. SFTP

C. RARP

D. ARP

E. TFTP

Answer: A


New Questions 24

Which two statements about using leased lines for your WAN infrastructure are true? (Choose two.)

A. Leased lines provide inexpensive WAN access.

B. Leased lines with sufficient bandwidth can avoid latency between endpoints.

C. Leased lines require little installation and maintenance expertise.

D. Leased lines provide highly flexible bandwidth scaling.

E. Multiple leased lines can share a router interface.

F. Leased lines support up to T1 link speeds.

Answer: B,C


100% Up to date Cisco 200-125 Questions & Answers shared by Allfreedumps, Get HERE: https://www.allfreedumps.com/200-125-dumps.html (New 573 Q&As)


Get More Information : Get 200-125 now

Money Back Guarantee

Guarantee

CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.

Who Chooses CertifyForAll

CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.

EXE exam format