Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) Quiz Number: 300-075
Involved Accreditations: Cisco
On the market Languages: Uk, Nippon, Chinese language, Simple spanish, Euro, Vietnamese, French, Portuguese
Quiz Term : Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)
Questions : [productnum] Q&As
Bring up to date Time: [productupdatetime]
Value: [productprice]

2016 Nov combat training black ops 300-075:

Q61. Refer to the following exhibits. 

Users in the U.S dial Germany by calling 9011 49 followed by the remaining digits. What would be the most suitable configuration for Connection X? 

A. Configure a SIP trunk to 10.140.1.1 and a SIP route pattern +49T in Cisco Unified Communications Manager. 

B. Configure a SIP trunk to the Cisco Unified Border Element and route pattern +49T in Cisco Unified Communications Manager. 

C. configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for 9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk. 

D. Configure a SIP trunk to the ITSP. Configure a translation pattern for 9011.49T using DDI predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk. 

Answer:

Explanation: 

Incorrect Answer: A, B, D SIP trunks for public switched telephone network (PSTN) access are an important new access method for business collaboration. Service providers throughout the world offer SIP trunking as an alternative to traditional TDM (T1/E1) connections. A discard digits instruction (DDI) removes a portion of the dialed digit string before passing the number on to the adjacent system. A DDI must remove portions of the digit string, for example, when an external access code is needed to route the call to the PSTN, but the PSTN switch does not expect that access code. 

Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a03rp.html 


Q62. Refer to the exhibit. 

Which CSS is used at the HQ Cisco Unified Communications Manager to reroute calls via the PSTN when the SAF network is unavailable? 

A. the phone device CSS 

B. the phone line CSS 

C. the phone line/device combined CSS 

D. the SAF CSS configured on the CCD requesting service 

E. the phone AAR CSS configured at the phone device 

F. No special CSS is required. If SAF patterns are accessible, the PSTN reroute is automatic. 

Answer:


Q63. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D 


Q64. Which two options are effective mechanisms to restrict the maximum number of voice calls on a WAN link? (Choose two.) 

A. Configure a gatekeeper with an SIP trunk. 

B. Configure a gatekeeper and a gatekeeper-controlled trunk in Cisco Unified Communications Manager with bandwidth control. 

C. Configure Cisco Unified Communications Manager regions. 

D. Configure Cisco Unified Communications Manager locations. 

Answer: B,D 


Q65. How can the location setting be modified to resolve poor call quality? 

A. No adjustment to location setting is needed 

B. Mark the bandwidth between the locations as unlimited 

C. Decrease the audio bandwidth setting 

D. Remove the audio bandwidth setting 

Answer:


Q66. In the case of a VCS cluster, which configuration element is recommended for endpoint H.323 registration? 

A. DNS SRV records pointing to the VCS cluster name 

B. static IP addresses 

C. hostname of the VCS cluster configuration master 

D. hostname of the VCS cluster member peer 

Answer:


Q67. Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder? 

A. show eigrp service-family ipv4 clients 

B. show eigrp address-family ipv4 clients 

C. show voice saf dndb all 

D. show saf registration 

E. show ip saf registration 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E show eigrp service-family ipv4 clients Displays information from the EIGRP IPv4 service-family results. 


Refresh cisco 300-075 exam:

Q68. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. 

Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

How many route lists and route groups should be configured for AAR at a minimum? 

A. a single route list with a local route group for each site 

B. two route lists and two route groups for each site 

C. a single route list and four route groups for each site 

D. None. The AAR CSS can point directly to the route pattern. 

Answer:


Q69. Which two actions ensure that the call load from Cisco TelePresence Video Communication Server to a Cisco Unified Communications Manager cluster is shared across Unified CM nodes? (Choose two.) 

A. Create a neighbor zone in VCS with the Unified CM nodes listed as location peer addresses. 

B. Create a single traversal client zone in VCS with the Unified CM nodes listed as location peer addresses. 

C. Create one neighbor zone in VCS for each Unified CM node. 

D. Create a VCS DNS zone and configure one DNS SRV record per Unified CM node. 

E. In VCS set Unified Communications mode to Mobile and remote access and configure each Unified CM node. 

Answer: A,D 


Q70. If the device pool in the phone record does not match the device pools in the matching subnet, what will the system consider the phone to be? 

A. roaming 

B. unregistered 

C. unknown 

D. new device 

Answer:


Q71. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phones. The Cisco VCS and TMS control the Cisco TelePresence Conductor, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DNS Servers 

Device Pool 

Expressway 

ILS 

Locations 

MRA 

Speed Dial 

SIP Trunk 

Which three configuration tasks need to be completed on the router to support the registration of Cisco Jabber clients? (Choose three.) 

A. The DNS server has the wrong IP address. 

B. The internal DNS Service (SRV) records need to be updated on the DNS Server. 

C. Flush the DNS Cache on the client. 

D. The DNS AOR records are wrong. 

E. Add the appropriate DNS SRV for the Internet entries on the DNS Server. 

Answer: B,C,E 


Q72. Refer to the exhibit. 

Which configuration elements must match for adjacent neighbors to establish a SAF neighbor relationship? 

A. the label name specified in the router eigrp command 

B. the autonomous-system number specified in the service-family ipv4 autonomous-system command 

C. the sf-interface configuration 

D. the topology base configurations 

E. the label name specified in the router eigrp command and the autonomous-system number 

Answer:

Explanation: 

Incorrect Answer: A, C, D, E service-family ipv4 autonomous-system 1 enables a Cisco SAF service family for the specified autonomous system on the router Link: 

http://www.cisco.com/en/US/docs/ios/saf/configuration/guide/saf_cg_ps10591_TSD_Products_Configuration_Guide_Chapter.html#wp1056363 


Q73. Refer to the exhibit. 

How does the Cisco Unified Communications Manager advertise dn-block 2? 

A. 14087071222 with number type international 

B. +14087071222 with number type international 

C. +14087071222 

D. 14087071222 

Answer:


Q74. Which method can be used to address variable-length dial plans? 

A. Overlap sending and receiving. 

B. Add a prefix for all calls that are longer than 10-digits long 

C. Use nested translation patterns to eliminate inter-digit timeout 

D. Use the @macro on the route pattern 

E. Use MGCP gateways, which support variable-length dial plans 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E If the dial plan contains overlapping patterns, Cisco Unified Communications Manager does not route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to choose a current match). Check this check box to interrupt interdigit timing when Cisco Unified Communications Manager must route a call immediately. By default, the Urgent Priority check box displays as checked. Unless your dial plan contains overlapping patterns or variable length patterns that contain!, Cisco recommends that you do not uncheck the check box. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsintrcm.htm 


Q75. An update of the configuration using the Cisco CTL client not needed when _______. 

A. a Cisco Unified CallManager has been removed 

B. an LSC of the IP phone is upgraded 

C. a security token is added to the system 

D. an IP address of the Cisco TFTP server has been changed 

Answer:

Explanation: 

Incorrect Answer: A, C, D The CTL file contains entries for the following servers or security tokens: 

. System Administrator Security Token (SAST) 

. Cisco CallManager and Cisco TFTP services that are running on the same server

. Certificate Authority Proxy Function (CAPF) . 

. TFTP server(s) 

. ASA firewall 

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/8_6_1/secugd/secuauth.h tml#wp1028878