What Does 300-075 question Mean?

Free Instant Download NEW 70-490 Exam Dumps (PDF & VCE):
Available on: https://www.certifytools.com/300-075-exam.html

Most of each of our customers keep trust about us because of each of our warranty that over 95% passing guarantee. Normally, full refund or another products. We furthermore provide along with consolation for the unsuccessful buyers. Without any kind of delay if they fail the Cisco Cisco exam. Simply contact each of our Customer Help to claim your refund or exchange the products. Further far more, you have to attach your failed transcript.

2017 Mar 300-075 practice test

Q111. Refer to the following exhibit. 

Which Cisco IOS SAF Forwarder configuration is correct? 

A. Exhibit A 

B. Exhibit B 

C. Exhibit C 

D. Exhibit D 

Answer:

Explanation: 

Incorrect Answer: B, C, D Summary steps to configure IOS SAF forwarder is given below 

1. enable 

2. configure terminal 

3. router eigrp virtual-instance-name 

4. service-family {ipv4 | ipv6} [vrf vrf-name] autonomous-system autonomous-system-number 

5. topology base 

6. external-client client_label 

7. exit-sf-topology 

8. exit-service-family

9. exit

10. service-family external-client listen {ipv4 | ipv6} tcp_port_number

11. external-client client-label

12. username user-name

13. password password-name 

14. 


Q112. Refer to the exhibit. 

All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented? 

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0. 

B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first. 

C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. 

D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool. 

Answer:

Explanation: 

Expiation: 

To ensure that the hardware bridge is utilized first with all its resources BEFORE the software bridge is used … you need to have two separate MRG’s and list the hardware MRG 1st in the MRGL … 


Q113. Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder? 

A. show eigrp service-family ipv4 clients 

B. show eigrp address-family ipv4 clients 

C. show voice saf dndb all 

D. show saf registration 

E. show ip saf registration 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E show eigrp service-family ipv4 clients Displays information from the EIGRP IPv4 service-family results. 


Q114. The relationship between a Region and a Location is that the Region codec parameter is used between a Region and its configured Locations. 

A. TRUE 

B. FALSE 

Answer:

Explanation: 

Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331 


Q115. Company X has three locations connected via a low bandwidth WAN. Which two configurations are required in the Cisco Unified Communications Manager regions to provide the most suitable use of bandwidth while preserving the call quality? (Choose two.) 

A. g729 codec for intraregion calling 

B. g722/g711 codec for interregion calling 

C. g729 codec for interregion calling 

D. g722/g711 for intraregion calling 

E. g729 codec for all calling 

F. g722/g711 codec for all calling 

Answer: C,D 


Improved 300-075 exam cram:

Q116. Refer to the exhibit. 

Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1. 

How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups? 

A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number. 

B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice. 

C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk The second route group contains MGCP gateway. 

D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups The first route group contains the H 225 trunk The second route group contains MGCP gateway with prefix digits 91 408554 for the called number. 

Answer:

Explanation: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b03rtgrp.html #wpxref46617 


Q117. If the device pool in the phone record does not match the device pools in the matching subnet, what will the system consider the phone to be? 

A. roaming 

B. unregistered 

C. unknown 

D. new device 

Answer:


Q118. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.) 

A. RSVP can be enabled selectively between pairs of locations. 

B. Using RSVP for CAC simply allows admitting or denying calls based on a logical 

configuration that is ignoring the physical topology. 

C. RSVP is topology aware, but only works with full mesh networks. 

D. An RSVP agent is a Media Termination Point that the call has to flow through. 

E. RSVP and RTP are used between the two endpoints. 

Answer: A,D 

Explanation: 

Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214 


Q119. When you configure QoS on VCS, which settings do you apply if traffic through the VCS should be tagged with DSCP AF41? 

A. Set QoS mode to DiffServ and tag value 32. 

B. Set QoS mode to IntServ and tag value to 34. 

C. Set QoS mode to DiffServ and tag value 34. 

D. Set QoS mode to IntServ and tag value to 32. 

E. Set QoS mode to ToS and tag value to 32. 

Answer:


Q120. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.) 

A. call-manager-fallback 

B. max-ephones 

C. keepalive 

D. limit-dn 

E. ip source-address 

Answer: A,B,E 


Get More Information : Get 300-075 now

Money Back Guarantee

Guarantee

CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.

Who Chooses CertifyForAll

CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.

EXE exam format