It is impossible to pass Cisco cisco 300 075 exam without any help in the short term. Come to Ucertify soon and find the most advanced, correct and guaranteed Cisco cisco 300 075 practice questions. You will get a surprising result by our Renewal Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.

Q121. In what Cisco solution is Simple Network-Enabled Auto Provision technology used? 

A. Cisco Unified Gateway Duplication 

B. Cisco Unified CallManager Redundancy 

C. Cisco Unified SRST 

D. Cisco Unified Call Survivability 

Answer:

Explanation: 

Incorrect Answer: A, B, D When the system automatically detects a failure, Cisco Unified SRST uses Simple Network Auto Provisioning (SNAP) technology to auto-configure a branch office router to provide call processing for the Cisco Unified IP phones that are registered with the router Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesr st.html 


Q122. Which two configurable options are available to enable Early Offer for calls over a Cisco Unified Communications Manager SIP trunk? (Choose two.) 

A. No Media Termination Point Required 

B. Media Termination Point Required 

C. Accept Audio Codec Preferences in Received Offer 

D. Early Offer support for voice and video calls Mandatory (insert MTP if needed) 

E. Use Trusted Relay Point 

Answer: B,D 


Q123. A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be? 

A. H.323 gateway 

B. Cisco 3825 

C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected. 

D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router. 

E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router. 

Answer:


Q124. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones? 

A. Configure the branch office IP phones with CSS and partitions. 

B. Configure the branch office IP phones with MRGs and MRGLs. 

C. Configure the branch office IP phones with regions. 

D. Configure the branch office IP phones with locations. 

Answer:


Q125. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

What should the AAR group prefix be? 

A. 9 

B. 91 

C. none 

D. + 

E. +1 

Answer:


Q126. Which two options are requirements for deploying an H.323 gateway with Cisco Unified Communications Manager? (Choose two.) 

A. Cisco Unified Communications Manager and the H.323 gateway must be configured use the same TCP port for H.323 calls. 

B. The H.245TCSTimeout timer must be set to at least 25. 

C. Cisco voicemail ports must be active. 

D. The Media Exchange Interface Capability Timer must be set to less than 20. 

E. The Media Exchange Timer must be set to less than 20. 

Answer: A,B 


Q127. Where do you specify the device mobility group and physical location after they have been configured? 

A. phones 

B. DMI 

C. device mobility CSS 

D. device pool 

E. MRGL 

F. locale 

Answer:

Explanation: 

Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link: 

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02devpl.ht ml 


Q128. Which statement is true regarding the configuration of SAF Forwarder? 

A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems. 

B. The client label that is configured in Cisco Unified Communications Manager must match the configuration on the SAF Forwarder router. 

C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as SAF clients. 

D. The destination IP address must match the loopback address of the SAF router. 

Answer:


Q129. Which device must be accessible from the public Internet in a Collaboration Edge environment? 

A. Expressway-C 

B. Cisco Unified Communications Manager 

C. Cisco IM and P 

D. Expressway-E 

E. VCS Control 

Answer:


Q130. Which statement about SIP precondition is most correct? 

A. When configuring SIP precondition, the SIP trunk must have access to an RSVP agent. 

B. When configuring SIP precondition, the IP phones must have access to an RSVP agent. 

C. When configuring SIP precondition, the IP phones and SIP trunk must have access to an RSVP agent. 

D. RSVP agents are only required for the IP phones. SIP trunks require RSVP agents only when fall back to local RSVP is configured. 

E. SIP trunk will always require RSVP agents regardless of what RSVP type is configured. 

Answer: