Get actual & Latest 300-075 Questions, Plus Accurate Answers
Exam Code: 300-075
Exam Name: CIPTV2 Implementing Cisco IP Telephony and Video, Part 2
Where to find 300 075 ciptv2
We provide real 300 075 pdf exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco cisco 300 075 Exam quickly & easily. The 300 075 pdf PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco 300 075 vce dumps pdf and vce product and material, you can easily pass the 300 075 ciptv2 exam.
Q101. Refer to the exhibit.
When a user presses a speed dial to +442079460255 when the SAF network is down, which event should occur?
A. The call will reroute via the PSTN with the constructed PSTN number as 442079460255.
B. The call will reroute via the PSTN with the constructed PSTN number as +442079460255.
C. The call will reroute via the PSTN with the constructed PSTN number as 00442079460255.
D. The call will fail because the ToDID is 0:.
E. The call will fail because the called number will be 2079460255.
Q102. Which task must you perform before deleting a transcoder?
A. Delete the dependency records.
B. Unassign it from a media resource group.
C. Use the Reset option.
D. Remove the device pool.
E. Remove the subunit.
F. Delete the common device configuration.
Q103. Which configuration command disables the secondary dial tone on the branch office ISR for users calling from the PSTN into the branch office during a WAN failure?
B. voice translation-rule
C. incoming called-number
Q104. Refer to the exhibit
When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised?
A. 2XXX and the T0D1D will be 0:+498950555
B. 2XXX and the ToDID will be 0:+4989531 21
C. 4989S05552XXX and the ToDiD will be 0:
D. + 4989631 21 2XXX and the ToDiD will be 0:
E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0:
Incorrect Answer: B, C, D, E PSTN failover prepend digit is +498950555 Link:
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
Which device configuration option will allow an administrator to control bandwidth between calls placed between branches?
A. Media Resource Group List
B. Device Pool
D. AAR Group
In Cisco Unified Communications Manager Administration, use the System > Location Info menu path to configure locations. Use locations to implement call admission control in a centralized call-processing system. Call admission control enables you to regulate audio quality and video availability by limiting the amount of bandwidth that is available for audio and video calls over links between the locations
Q106. How is the region assigned to a device such as an IP phone?
A. Regions are assigned directly in the device configuration page.
B. Regions can be assigned only through a device pool.
C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence.
D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence.
Q107. How can the location setting be modified to resolve poor call quality?
A. No adjustment to location setting is needed
B. Mark the bandwidth between the locations as unlimited
C. Decrease the audio bandwidth setting
D. Remove the audio bandwidth setting
Q108. Refer to the exhibit.
How does the Cisco Unified Communications Manager advertise dn-block 2?
A. 14087071222 with number type international
B. +14087071222 with number type international
Q109. How many active gatekeepers can you define in a local zone?
Q110. Refer to the exhibit.
You have configured transcoder resources in both an IOS router and a Cisco Unified Communications Manager. When you review the configurations in both devices the IP addresses and transcoder names are correct, but the transcoder is failing to register with the Cisco Unified Communications Manager. Which command needs to be edited to allow the transcoder to register properly?
A. The associate profile and dsp farm profile numbers need to match associate ccm 2 command.
B. The associate ccm 2 priority 1 command needs to be changed so the ccm value matches identifier 1 in the sccp ccm 10.1.1.1 command.
C. The sccp ccm group number needs to match the associate ccm 2 command.
D. The maximum sessions command must match the number of codecs configured under the dsp farm profile.
E. The sccp ccm group number must match the voice-card number.
Incorrect Answer: A, C, D, E The value of the IP address should match the IP address in the ip source-address command Link:
Get More Information : Get 300-075 now
Money Back Guarantee
CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.
Who Chooses CertifyForAll
CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.