Get actual & Latest 300-075 Questions, Plus Accurate Answers
Exam Code: 300-075
Exam Name: CIPTV2 Implementing Cisco IP Telephony and Video, Part 2
Getting Smart with: cisco 300 075
Our pass rate is high to 98.9% and the similarity percentage between our 300 075 vce study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 075 pdf exam in just one try? I am currently studying for the Cisco 300 075 pdf exam. Latest Cisco cisco 300 075 Test exam practice questions and answers, Try Cisco 300 075 ciptv2 Brain Dumps First.
Q121. Refer to the exhibit.
Assuming the regions configuration to BR only permits G.729 codec, how many calls are allowed for the BR location?
A. Total of four calls; two incoming and two outgoing.
B. Total of two calls in either direction.
C. Total of four calls to the BR location. Outgoing calls are not impacted by the location configuration.
D. Total of four calls in either direction.
E. Two outgoing calls. Incoming calls are unlimited.
Incorrect Answer: A, B, C, E In performing location bandwidth calculations for purposes of call admission control, Cisco Unified Communications Manager assumes that each G.729 call stream consumes 24 kb/s amount of bandwidth Link:
Q122. Which of the following are two functions that ensure that the telephony capabilities stay operational in the remote location Cisco Unified SRST router? (Choose two)
A. Automatically detecting a failure in the network.
B. Initiating a process to provide call-processing backup redundancy.
C. Notifying the administrator of an issue for manual intervention.
D. Proactively repairing issues in the voice network.
Q123. Which statement best describes globalized call routing in Cisco Unified Communications Manager?
A. All incoming calling numbers on the phones are displayed as an E.164 with the + prefix.
B. Call routing is based on numbers represented as an E.164 with the + prefix format.
C. All called numbers sent out to the PSTN are in E.164 with the + prefix format.
D. The CSS of all phones contain partitions assigned to route patterns that are in global format.
E. All phone directory numbers are configured as an E.164 with the + prefix.
Incorrect Answer: A, C, D, E For the destination to be represented in a global form common to all cases, we must adopt a global form of the destination number from which all local forms can be derived. The + sign is the mechanism used by the ITU's E.164 recommendation to represent any PSTN number in a global, unique way. This form is sometimes referred to as a fully qualified PSTN number. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html#wp1153205
Q124. Which statement is correct about AAR?
A. The end users see, "Network Congestion Rerouting?" but AAR is otherwise transparent to the end user and works without user intervention.
B. AAR will display "not enough bandwidth" on the IP phone while it reroutes the call.
C. AAR allows calls to be rerouted because of insufficient Cisco Unified Border Element controlled bandwidth to an ITSP.
D. AAR allows calls to be rerouted due to insufficient gatekeeper controlled IP WAN bandwidth.
Incorrect Answer: B, C, D Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml
Q125. When an incoming PSTN call arrives at an MGCP gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager?
A. Normalization is done by configuring the significant digits for inbound calls on the MGCP gateway.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the MGCP gateway.
Q126. Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?
A. Configure the branch office IP phones with CSS and partitions.
B. Configure the branch office IP phones with MRGs and MRGLs.
C. Configure the branch office IP phones with regions.
D. Configure the branch office IP phones with locations.
Q127. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of?
A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway.
B. First route group should be only the local route group. The second route group should point to the U.S. gateway.
C. First route group should point only to the U.S. gateway. The second route group should be the local route group.
D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically.
E. The \+! route pattern should point directly to the U.S. gateway.
Incorrect Answer: A, B, D The route group points to one or more gateways and can choose the gateways for call routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group. Link:
Q128. You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call processing environment. During the initial extension mobility login request, how does the visiting cluster determine if the user is a local user or a remote user?
A. by using a third-party automatic provisioning tool to verify user ID
B. by broadcasting a request to all clusters to verify the user type
C. from user IDs that are created by default when the user logs in
D. by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks
E. by verifying against the local database
F. by verifying the visiting Trivial File Transfer Protocol
Q129. Refer to the exhibit
When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised?
A. 2XXX and the T0D1D will be 0:+498950555
B. 2XXX and the ToDID will be 0:+4989531 21
C. 4989S05552XXX and the ToDiD will be 0:
D. + 4989631 21 2XXX and the ToDiD will be 0:
E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0:
Incorrect Answer: B, C, D, E PSTN failover prepend digit is +498950555 Link:
Q130. When you configure Cisco Unified Communications Manager, you need to configure the router for Survivable Remote Site Telephony in case the Cisco Unified Communications Manger stops working. On which two factors would the number of IP phones and Directory Numbers that can register to the SRST router depend? (Choose two.)
A. The protocol that is used in Cisco Unified Communications Manager
B. Cisco Unified Communications Manager version
C. Cisco IOS Software version
D. WAN link bandwidth
E. capacity of the Cisco Media Convergence Server
F. router platform
Get More Information : Get 300-075 now
Money Back Guarantee
CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.
Who Chooses CertifyForAll
CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.