300 075 dump [Nov 2017]

Free Instant Download NEW 70-490 Exam Dumps (PDF & VCE):
Available on: https://www.certifytools.com/300-075-exam.html

Master the cisco 300 075 Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) content and be ready for exam day success quickly with this Testking cisco 300 075 test engine. We guarantee it!We make it a reality and give you real 300 075 pdf questions in our Cisco cisco 300 075 braindumps.Latest 100% VALID Cisco 300 075 dump Exam Questions Dumps at below page. You can use our Cisco 300 075 vce braindumps and pass your exam.

Q71. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What should the Called Party Transformation Pattern at the U.S. gateway be configured as? 

A. \+.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: + 

B. \+1.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

C. \+408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: 1 

D. \+1408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

E. \+1.408! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None 

Answer:


Q72. What component acts as a user agent for both ends of a SIP call while Cisco Unified SIP SRST is providing failover during a WAN outage? 

A. B2BUA 

B. SIP server 

C. SIP proxy 

D. SIP SRST router 

E. SIP registrar 

Answer:


Q73. How many active gatekeepers can you define in a local zone? 

A. 1 

B. 2 

C. 5 

D. 10 

E. 15 

F. unlimited 

Answer:


Q74. Which task must you perform before deleting a transcoder? 

A. Delete the dependency records. 

B. Unassign it from a media resource group. 

C. Use the Reset option. 

D. Remove the device pool. 

E. Remove the subunit. 

F. Delete the common device configuration. 

Answer:


Q75. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

A third collaboration call fails between the backbone site and the HQ site. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Not enough bandwidth has been allocated. 

B. Device Pool. 

C. Location. 

D. The pipe is not functioning. 

Answer:

Explanation: 

Based on the exhibit, each call is limited to no more than 128kbps per call, but the total available bandwidth is set to 256 kbps. This will allow the first to calls to go through, but there will be no more available bandwidth for the third call. 


Q76. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

Movi Failure 

Movi Settings 

CIPTV Topo 

Subzone 

Links 

Pipe 

Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can’t make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure? 

A. Wrong username and/or password. 

B. Wrong SIP domain name. 

C. The TMSPE is not working. 

D. The bandwidth is incorrectly configured. 

Answer:


Q77. Which two configurations are needed to implement SRST in Cisco Unified Communications Manager? (Choose two.) 

A. SRST Gateway setting in Cisco Unified Communications Manager 

B. SRST Reference configured in Cisco Unified Communications Manager 

C. Device Pool SRST Reference setting 

D. Call Manager Group setting 

E. Cisco Unified Communications Locations setting 

Answer: B,C 


Q78. Which statement is true when device mobility mode is enabled or disabled in the Phone 

Configuration window? 

A. The device mobility mode phone settings take precedence over the service parameter settings. 

B. The service parameter settings take precedence over the device mobility mode phone settings. 

C. The combined service parameter settings and the device mobility mode phone settings will be used. 

D. The default settings will be used due to the conflicts. 

Answer:


Q79. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS and TMS control the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

DP 

Locations 

CSS 

SRST 

SRST-BR2 Config 

BR2 Config 

SRSTPSTNCall 

Which device configuration option will allow an administrator to control bandwidth between calls placed between branches? 

A. Media Resource Group List 

B. Device Pool 

C. Location 

D. AAR Group 

E. Regions 

Answer:

Explanation: 

In Cisco Unified Communications Manager Administration, use the System > Location Info menu path to configure locations. Use locations to implement call admission control in a centralized call-processing system. Call admission control enables you to regulate audio quality and video availability by limiting the amount of bandwidth that is available for audio and video calls over links between the locations 


Q80. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. Which statement is true? 

A. The AAR group system must be configured on the device configuration of the phones. 

B. The AAR group system must be configured on the line configuration of the phones. 

C. The single AAR group system cannot be used. A second AAR group must be configured in order to have source and destination AAR groups. 

D. The AAR group system must be configured under the AAR service parameters. 

Answer:


Get More Information : Get 300-075 now

Money Back Guarantee

Guarantee

CertifyForAll has a remarkable Candidate Success record. We're confident of our products and provide a no hassle money back guarantee.

Who Chooses CertifyForAll

CertifyForAll is the world's largest certification preparation company with 99.3% Pass Rate History from 170344+ Satisfied Customers in 145 Countries.

EXE exam format