Exam Code: cisco 300 075 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: CIPTV2 Implementing Cisco IP Telephony and Video, Part 2
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 300 075 pdf Exam.
P.S. Precise 300-075 cram are available on Google Drive, GET MORE: https://drive.google.com/open?id=13k1SgJUm09i4MMU4yEohEz-Kf0Pg9Gec
New Cisco 300-075 Exam Dumps Collection (Question 16 - Question 22)
Question No: 16
If the device pool in the phone record does not match the device pools in the matching subnet, what will the system consider the phone to be?
D. new device
Question No: 17
Which commands are needed to configure Cisco Unified Communications Manager Express in SRST mode?
A. telephony-service and srst mode
B. telephony-service and moh
C. call-manager-fallback and srst mode
D. call-manager-fallback and voice-translation
Question No: 18
Refer to the exhibit.
IT shows an H.323 gateway configuration in a Cisco Unified Communications Manager environment. An inbound PSTN call to this H.323 gateway fails to connect to IP phone extension 2001. The PSTN user hears a reorder tone. Debug isdn q931 on the H.323 gateway shows the correct called-party number as 5015552001. Which two configuration changes can correct this issue? (Choose two.)
A. Add port 1/0:23 to dial-peer voice 123 pots.
B. Ensure that the Significant Digits for inbound calls on the H.323 gateway configuration is 4.
C. Add a voice translation profile to truncate the number from 10 digits to 4 digits. Apply the
voice translation profile to the Voice-port. The configuration field "Significant Digits for inbound calls" is left at default (All).
D. Add the command h323-gateway voip id on interface vlan120.
E. Change the destination-pattern on the dial-peer voice 23000 VoIP to 501501? and change the Significant Digits for inbound calls to 4.
Explanation: Incorrect: ACD
Choose the number of significant digits to collect, from 0 to 32. Cisco Unified Communications Manager counts significant digits from the right (last digit) of the number that is called.
Question No: 19
When an incoming PSTN call arrives at an H.323 gateway, how does the calling number get normalized to a global E.164 number with + prefix in Cisco Unified Communications Manager?
A. Normalization is done using translation patterns.
B. Normalization is done using route patterns.
C. Normalization is done using the gateway incoming called party prefixes based on number type.
D. Normalization is done using the gateway incoming calling party prefixes based on number type.
E. Normalization is achieved by local route group that is assigned to the H.323 gateway.
Question No: 20
Which option describes a function of SIP preconditions?
A. SIP preconditions enable end-to-end RSVP over an SIP trunk.
B. SIP preconditions enable RSVP between Cisco IP Phones.
C. SIP preconditions can be enabled in a gatekeeper.
D. SIP preconditions enable end-to-end RSVP for calls through the PSTN.
Question No: 21
What are two important considerations when implementing TEHO to reduce long-distance cost? (Choose two.)
A. on-net calling patterns
B. E911 calling
C. number of route patterns
D. caller ID
Question No: 22
A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be?
A. H.323 gateway
B. Cisco 3825
C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router.
Recommend!! Get the Precise 300-075 dumps in VCE and PDF From Thedumpscentre, Welcome to download: http://www.thedumpscentre.com/300-075-dumps/ (New 420 Q&As Version)